Category Archives: Camera Restoration

W. Watson & Sons 12×15 “field” camera restoration project – step 1

Well, here’s a piece of ambition for you- getting this 12×15 W. Watson & Sons 12×15 inch “field” camera restored and up and running again. The W.Watson & Sons dates to around 1880. Once it is up and running, I’m planning on putting a nice 16″ (405mm) Kodak f4.5 Portrait meniscus lens on it.

The biggest hassle will actually be getting new film holders made for it, since it’s a bit of an exotic size to begin with, and it was originally designed for glass dry plates, not film. I’ve got someone lined up for the film holders – it’s just a matter of negotiations and finding the time to have them made.

I’m shopping around for new bellows for it because I’m just too damn lazy to make my own – this would be a simple case to do because the bellows are square and not tapered (I had a fragment of the original bellows but they were too rotted to use for anything, and they stank something awful).

Making the new ground glass will be easy – I just have to get some reasonably accurate measurements from the ground glass frame, go to the hardware store and have them cut me a piece, then get busy with the valve grinding compound. By the time I’m done with it, I’ll have a very buff left arm.

I was very lucky really, that the camera was in as good a shape as it is – when it arrived from the UK, it was quite filthy and looked like it needed a complete stripping and rehab. With a bit of cleaning and some olive oil, the mahogany came back quite nicely, and I was pleasantly surprised to discover that the brass hardware was originally gilded, and that much of the gilding remained.